Baumatic BCS461SS - Manual (Page 16)

16
display will show the
words “Program finished remove the dish”. Press any button to
o
If no other buttons are pressed, the oven will switch off
his function will allow you to set a time in the future that the oven
Prepare the food that you wish cook and place it in the oven. Set
cooking time setting mode press
the timer button once. The cooking time symbol
o
The display will show “00:00” and the “:” symbol will flash to
o
Use the plus and minus buttons to program the
the timer button
again to enter the end of cooking time setting
e previously set to the current time of day. The
“:” symbol will flash to indicate that you can adjust the end of
ct end of cooking time release all buttons and in a few
seconds the “:” will remain steady and the timer function will be
time it needs to switch on at
based on the cooking time you have set and the end of cooking
display will show the
o
When the programmed time of day is reached the alarm will
sound and the oven will stop heating. The
silence the alarm or open the oven door.
automatically after 1 minute.
Setting the start and end of cooking time function
T
switches on at and a time that the oven will switch off at.
o
the required cooking function and temperature.
o
To enter the
will light up.
indic ate that you can set the cooking time.
cooking time required.
o
When the timer display shows the correct
cooking time immediately press
mode. The end of cooking symbol will light up.
o
The display will show a proposed end of cooking time by adding
the cooking tim
cooking time.
o
Use the plus and minus buttons to program the time of day that
you wish for cooking to stop at. When the display shows the
corre
set.
o
The oven will go into standby mode and the oven light will turn
off. The oven will calculate what
time that you have programmed.
o
When the programmed time of day is reached the alarm will
sound and the oven will stop heating. The