Baumatic BO610.5SS User Manual
Page 29
o
Re-fix the grill burner, no further adjustments are necessary.
o
Remove the control
panel cover from the
top of the appliance.
o
Remove the oven
control knobs and
then undo the two
fixing rings that are
exposed underneath,
by turning them anti-
clockwise.
o
Disconnect the neon lamp at the rear of the fascia and then
remove the control panel front. Then refit the thermostat control
knob.
o
Ensure that the appliance is in a safe condition, and then
reconnect it to the electric and gas supply.
o
Open the oven door fully and ignite the oven burner. You should
set the oven to maximum temperature, then close the oven door
and leave the appliance for 10 – 15 minutes.
o
Reduce the temperature to its minimum setting and remove the
thermostat control knob.
o
DISCONNECT THE APPLIANCE FROM THE ELECTRICITY
SUPPLY.
o
The bypass adjustment screw (A) is located on the side of the
valve body. Access can be made from the front of the appliance
29