Baumatic BO610.5SS - Manual (Page 28)

o
Unscrew screw (A) which will allow you to remove the oven
burner.
o
Unscrew the injector (B) and replace it with one suitable for LPG
(see the table on the previous page). It is recommended that the
appropriate thread sealant is used; always check for gas
tightness after assembly.
o
Re-fit the burner and the base of the oven cavity by following
the above steps in reverse.
o
Remove the grill burner.
o
Replace the injector with one
suitable for LPG (see the table
on the previous page). It is
recommended that the
appropriate thread sealant is
used; always check for gas
tightness after assembly.
28