Baumatic BO610.5SS - Manual (Page 12)

Switching the gas oven on
The oven has automatic ignition, to light it you should do the
following:-
o
Open the door of the appliance.
o
Push the oven function control knob down slightly and then turn
it anticlockwise to the gas oven and ignition symbols.
o
Whilst it is pointed to the gas oven ignition position, fully push
down this knob and hold it down.
o
The gas oven should light within 15 seconds.
o
Once the burner has lit, continue to keep the oven function and
temperature control knob held down for a further 10 seconds.
Otherwise the safety cut off will operate and block the flow of
gas.
o
IMPORTANT: When you are certain that the oven burner is fully
lit, close the oven door. Then turn the oven function control knob
anticlockwise until it reaches the temperature that you desire.
o
DO NOT turn the control knob past the 250°C position,
otherwise the burner may go out.
o
If the gas oven does not light within 15 seconds, then release
the oven function control knob.
o
IMPORTANT: YOU MUST TURN THE CONTROL KNOB BACK
TO ITS ORIGINAL POSITION; OTHERWISE GAS WILL
CONTINUE TO BE RELEASED.
o
Wait for 1 minute, before repeating the ignition procedure again.
When lighting your oven for the first time, it may take
several attempts until the electric ignition operates. This is
due to air being in the gas pipe.
12