Basler Electric BE1-27 - Manual (Page 5)

9170600990 Rev L BE1-27/59 Introduction iii
REVISION HISTORY
The following information provides a historical summary of the changes made to the BE1-27, BE1-59, and
BE1-27/59 instruction manual (9170600990). Revisions are listed in reverse chronological order.
Manual
Revision and Date
Change
L, 12/12  Standardized case and cover drawings in Section 4.
K, 09/11
 Changed notes 3 and 4, and added note 5 in Style Chart in Section 1.
 Updated GOST-R statement in Section 1.
 Updated Storage statement in Section 4.
J, 07/08  Modified style chart in Section 1 by adding note #4 to Timing options
C4 through D8.
 Removed “Range 2” from Figures 3-3, 3-5, 3-6, and 3-7.
H, 02/08  Consolidated sensing input range options in style chart of Figure 1-2
to cover all relay models.
G, 09/07  Updated Output Contacts ratings in Section 1.
 Moved content of Section 6, Maintenance to Section 4.
 Updated front panel illustrations to show laser graphics.
 Moved content of Section 7, Manual Change Information to manual
introduction.
 Added manual part number and revision to all footers.
 Updated cover drawings.
 Updated power supply burden data in Section 1.
 Updated target Indicator description in Section 3.
F, 06/07  Updated specifications listed in Section 1.
E, 07/04
 Added missing square root symbol to equations of System Voltages
paragraph in Section 3, Functional Description.
D, 06/03
 Revised Resistive and Inductive Output Contact Ratings on page 1-4.
 Updated the Definite Time Accuracy setting on page 1-5.
 Deleted Range 2 row from Figures 3-2 through 3-4.
 Added a new step (Step 3) under Timing for instantaneous to page 5-
4.
 Changed the table that Note 2 referred to in Figure 5-2.
 Page 5-5, Table 5-3, Timing Test Results, Definite Timing Type specs
were changed.
C, 11/99
 Revised the manual to the current standard format.
 Changed characteristic curves figures in Section 3 to improve the
accuracy.
 Added ground terminals to new Figures 1-1 and 4-16.
 Added interconnection diagrams, Figures 4-13, 4-14, and 4-15.
 Added Section 7, Manual Change Information.
—, 01/86  Initial release