Video routing commands – AVocation Systems MX-0404NAD/R User Manual
Page 19
D25
MXxxZ60
Read sensitivty control enable/disable status
MX00Z60
Get the status of sensitivty control ability
Response: MXxx-Sensitivity control enabled
Response: MXxx-Sensitivity control disabled
Video Routing Commands
MXxxViioo
Route a video input to an video output
MX00V0103
Routes video input 1 to output 3
Response: MXxx-Video=ii to oo
MXxxViio1,o2,o3,o4,o5,o6,o7,o8,o9,o10
Route an video input to as many as 10 outputs
MX00V0101,02,03,04,05,06,07,08,09,10
Routes video input 1 to outputs 1 to 10
MX00V0101,02,03,04
Routes video input 1 to outputs 1 to 4
Response: MXxx-Video=ii to oo
(for each route made)
MXxxVAii
Routes a video input to all outputs
MX00VA02
Routes video input 2 to all video outputs
Response: MXxx-Video=ii to oo
(for each route made)
MXxxVFoo
Turn a video output off
MX00VF03
Turn off video output number 3
Response: MXxx-Video=00 to oo
MXxxSV(oo)
Query for the status of a video route.
MX00SV
Returns the status of all the video routes
MX00SV04
Returns the routing status of video output number 4
Response: MXxx-Video=ii to oo
(each output will be sent if output number not specified)