Etwork, Ake up, Ogout – Aviosys 9223K-D User Manual
Page 24: Nternal, Ettings, Set power command, Set delay power command
- 24-
Ref#9223KD0001
Set Power Command
The Set Power command allows you to control the devices on/off through the http commands.
With this command you can integrate can integrate the 9223K-D with any other system.
Outlet
Power On
Power Off
Output 1
61 = 1
61 = 0
Output 2
62 = 1
62 = 0
Output 3
63 = 1
63 = 0
Output 4
64 = 1
64 = 0
Ex. For Single Port Control On
Output: P61=1
Ex. For Single Port Control Off
Output:P61=0
Ex. For Multiple Port Control
Output: P61=1,P62=1,P63=1,P64=1
Set Delay Power Command
/set.cmd?cmd=setpower+p61=1+p61n=0+t61=30
p61=1+p61n=0+t61=30
means
Output 1 turn ON first and then turn off after 30 seconds
Read Power Command
1. Set P6 On/Off
(ON) , setpower+p61=0(OFF)
2. Read P6