Aviosys 9223K-D - Manual (Page 22)

- 22-
Ref#9223KD0001
Pin I/O On/Off: Select the action of choice, On or off
For example:
n If you would like to turn on the device at 8AM and turn off the device at 8PM, the device may be
set in this fashion.
System Startup Power Default Value: The system power default allows the user to select the
power to be on or off by default when the device is powered up.
Note:
Please remember that you use normally open or normally closed the output control will either
create a open circuit or a closed circuit.
Device Status
Control Status Circuit
Normally Closed On Open
Normally Open On Closed
Network Wake up
The network wake up function allows the 9223 to wake up computers, servers or systems that
have a wake on lan capability. This functionality is not available on all PC
’s and requires the
motherboard or Ethernet card to have Wake on Lan support for this functionality to work correctly.
Simply just type in the mac address of the system that you would like to start up and hit the send
button and the device will be activated.