Aviosys 9223K-D - Manual (Page 13)

- 13-
Ref#9223KD0001
2.) Open IPEdit and any device in the same network should automatically be detected and
listed in the local devices sections.
Note: If the device is not showing up, please hit the rescan button and wait about 1
minute
3.) Click and highlight the device and the information on the device will populate on the right.
Check to see if the gateway and IP Address match your current network. If not, type in
the correct information and input it into IP Edit. Then hit the submit button to
save changes. Then hit the rescan button to see if the changes have been made.
4.) Then double click on the device in the local device section and an IE web browser will
pop up. If everything is set correction you should be in the login page area.