Aviosys 9268 - Manual (Page 21)

(Control Panel)
From the control panel each power outlet for that device can be customized.
Hit the apply button after the changes have been made.
To turn on or off the outlet select On or Off and then hit the apply button to activate the
command.
System Configuration
Configure the system configuration page is where the device will be setup.
RF Setup
To connect the 9268M (Master) to the 9268-PR (Slave) devices follow the following
directions:
Setup the 9268-PR (Slave device)
1.) Hold the “reset” for the 9268-PR for more than 5 seconds until you hear a “beep”
“beep” sound.
- 21 -