Avionics Innovations ICE PCU (Passenger Control Unit) Operation Manual - Manual (Page 9)

7 ICE Operation Manual, P/N 8011-00, Rev A, January 18, 2006
Display Change
Pushing the DISP button will change what is displayed (channel with name, art-
ist, song, category, or presets and number).
Pushing the SRC button will change the way the unit cycles through the channels
(Channel, Presets, and Category).
The UP and DOWN arrow keys will navigate through only the channels within
these selections.
If no presets are setup, the display will say “NO PRESETS” and navigation will
not be possible in that sub menu.
If you have selected the “POP” category, the UP arrow key will increment up
through all of the channels within that category. When you reach the highest
channel, the unit will loop back to the lowest channel.
To Cycle The Category Modes
1. Press the DISP button.
The category will be displayed.
2. Press the UP or DOWN button to navigate to the desired category.
3. Push the DISP button again.
Now the UP and DOWN buttons will change the channel within the category.