Initial system setup, Pcu controls & operation – Avionics Innovations ICE PCU (Passenger Control Unit) Operation Manual User Manual
Page 5

3
ICE Operation Manual, P/N 8011-00, Rev A, January 18, 2006
Initial System Setup
Immediately after installing or applying power to the unit, it should be initialized.
The DVD system does a self-test and should become usable within 30-45 sec-
onds. During this time avoid pressing any buttons on the PCU.
PCU Controls & Operation
The PCU contains all of the necessary controls and displays for the operation of
the ICE System. The controls are as follows:
PWR: This switch turns the power on to the PCU. Cycling this
switch turns the power from on to off and back to on.
Up: This button increments the SAT channel up or the track / chap-
ter of the CD / DV
DWN: This button increments the SAT channel down or the track /
chapter of the CD / DVD.
DISP: This button changes the SAT display from channel to chapter
or title. This button ejects the DVD / CD during DVD mode.
MEM: This button is used for presetting the memorized favorites.
There are 18 presets available.
Arrow: This button is the play pause button for the DVD / CD.
SRC: This button changes the mode from SAT to DVD to AUX.
Rotary / Push-button: This knob is used to increment and decre-
ment the volume and other features such as bass, treble and audio
selections. The knob is pushed to select the function to change
(Main Volume, Bass, Treble, Secondary Output Source, Secondary
Volume, and Sirius ID). When a menu item is displayed, rotating the
knob will change the value. Pushing the knob will move to the next
menu item.