Dvd operation, Secondary output, Initial system setup – Avionics Innovations ICE PCU (Passenger Control Unit) Operation Manual User Manual
Page 6: Preparation for playback

ICE Operation Manual, P/N 8011-00, Rev A, January 18, 2006
4
Secondary Output
When it is desired to have another audio output enabled for a flight attendant
or flight crew, simply enter the sub menu with the rotary knob until Secondary
source is displayed. You can then select which source the listener can listen to.
The next selection will be secondary volume. Here the listener can adjust the
desired volume.
NOTE: The secondary output does not mute with the External mute
system.
DVD Operation
Initial System Setup
Immediately after installing or applying power to the unit, it should be initialized.
The DVD system does a self-test and should become usable within 30-45 sec-
onds. During this time avoid pressing any buttons on the PCU.
Preparation For Playback
1. Insert the DVD / CD with the label up.
2. Slide the DVD / CD in the slot located on the front of the DVD player until
the unit grabs the DVD / CD and loads it.
Note: Some DVD / CDs may auto play.
To Play DVDs & CDs
1. Press the POWER button on the PCU.
2. Press the SRC button to select “DVD.”
3. Press the PLAY / PAUSE button.
There is a slight delay as the DVD processes the commands slowly.
Note: During play you can use the “UP” and “DOWN” keys on the
PCU to advance or reverse in the track or chapters of the DVD /
CD.
To Adjust Volume / Bass / Treble
1. On the PCU, push the rotary knob to display the modification menu.