Finalizing the installation – Avalon Firestyles DVL Insert EF-2002 to 2005 User Manual
Page 17
Finalizing the Installation
1 7
Travis Industries
4 0 4 1 0 2 8
1 0 0 - 0 1 1 5 1
1
Remove the glass following the directions below.
Warning: The appliance must be completely cool before removing the glass.
Warning: Do not strike or slam the glass.
Note:
If using an Victorian Lace face, attach the arch covers after installing the glass.
Open the four latches holding the glass
frame in place (start with the two below
the glass) - follow the directions shown
to the right.
a
Twist 1/4 turn.
The spring pin will
disengage from the
latch bracket,
opening the latch.
Latch Bracket
Insert the 1/4” key
into the spring
pin.
Glass
Top of
Firebox
Spring Pin
Glass Frame
Lift the glass
frame up and
pull it forward to
remove.
b
Re-Attaching the Glass Frame:
a)
Hang the glass frame on the firebox.
b)
While holding in place, attach the upper latches
(follow the instructions to the right in reverse).
c)
Lift the glass frame slightly and attach the lower latches.
NOTE:
You may need to lift the glass
frame while re-attaching.