Avalon Firestyles Small Flush Hybrid-Fyre - Manual (Page 6)

6 Stove Installation
(for qualified installers only)
© Travis Industries 100-01342 4150521
Installation Options
 Masonry Fireplace Insert
 Zero-Clearance (Metal) Fireplace Insert
Features
 1.2 Cubic Foot Firebox Volume
 Single Air Control
 Accepts Logs Up to 18" Long
 Steel Plate Construction (Up to 5/16")
 Heavy Duty Refractory Firebrick
 Standard High-Tech Blower
Heating Specifications
Approximate Maximum Heating Capacity (in square feet)* 650 to 1,000
Maximum Burn Time Up to 7 Hours
* Heating capacity will vary depending on the home's floor plan, degree of insulation, and the outside
temperature. It is also affected by the quality and moisture level of the fuel.
This model was tested for efficiency using method B415.1-10 and was determined to have a weighted
average Higher Heating Value (HHV) Overall Heating Efficiency (OHE) of 76.5%.
Dimensions
(a) Measure clearances
from base of insert
(b) Fireplace Opening
(c) Extension Onto Hearth
(for hearth depth)
Emissions and Efficiency
This heater meets the 2015 U.S. EPA’s crib wood emission limits for wood heaters sold after May 15,
2015. Tested to Method 28, 5G2 this heater has been shown to deliver heat at rates ranging from 9,800
to 31,400 BTU/hr and an emission value of 0.89g/h.
a
265 Lbs. (118 Kg)
6" (153mm) Dia.
24.75" 629mm
18.75"
477mm
19.25"
489mm
19.625"
499mm
13.5"
343mm
b
1.5"
39mm
8.5"
216mm
b
2.25"
58mm
c