Avalon Firestyles Olympic - Manual (Page 6)

6 Features & Specifications
© Travis Industries 93508061 4150520
Installation Options
 Freestanding
 Freestanding in an Alcove
 Freestanding in a Mobile Home
 Masonry Fireplace Insert
NOTE: This fireplace insert is not approved for
Factory Built Z.C. (Metal) Fireplaces
Features
 3.1 Cubic Foot Firebox Volume
 Single Operating Control
 Accepts Logs Up to 24" Long
 Steel Plate Construction (1/4" & 3/16")
 Heavy Duty Refractory Firebrick
 Optional
High-Tech Blower
Heating Specifications
Approximate Maximum Heating Capacity (in square feet)* 1,500 to 2,500
Maximum BTU's per Hour (Cord Wood Calculation) 74,300
Overall Efficiency (Oregon Method) 70.0 %
Maximum Burn Time Up to 12 Hours
* Heating capacity will vary depending on the home's floor plan, degree of insulation, and the outside
temperature. It is also affected by the quality and moisture level of the fuel.
This model was not tested for efficiency however it is assigned a default efficiency of 63% by the EPA
under previous subpart AAA. Efficiency of this wood heater will be affected by the operational burn rate
and the moisture content of the wood used as fuel.
Dimensions
Figure 1
Emissions
This heater meets the 2015 U.S. EPA’s crib wood emission limits for wood heaters sold after May 15,
2015. Tested to Method 28, 5H this heater has been shown to deliver heat at rates ranging from 12,00 to
45,100 BTU/hr and an emission value of 2.6g/h.
Note:
Measure side, corner,
and back clearances
from the stove top.
29-3/8"
21 1/4"*
The flue collar
protrudes 1" above
the stove top
* For inserts, add 1" for the flue collar.
** See "Fireplace Requirements" for details
on fireplace insert installation.
5-3/4"
Height:
With Legs 29-1/8"
Pedestal 32-5/8"
20-1/2"**
Weight:
510 Lbs. with pedestal