ATEIS Messenger Series - Manual (Page 33)

Messenger Operating Manual
Page 33 of 38
12.8. Save and exporting FIR data:
12.8.1. Save your project data:
Last step is to save the project data once you have finished your project. For this select
‘SAVE’ from the ‘FILE’ menu at the top bar and save the project. Every project will carry the
extension *.lob
12.8.2. Exporting a FIR-file or Lobe-file:
Once you have finished your project and saved your project data, you want to listen to the
results of the lobe you have just created. To do this, you have to ‘EXPORT’ the data. Go to the
‘FILE’ menu and select ‘EXPORT’. A box will open asking you to name the FIR-lobe data,
which than will be stored with the extension: *.mfd
Now your file is ready for use and can be uploaded using M-control. For instructions, follow
the instructions as described in section 2.5 of this manual.