Artesyn ViewCheck on PrAMC-7311 Installation and Use (May 2014) - Manual (Page 86)

Commands Execution
ViewCheck on PrAMC-7311 Installation and Use (6806800S45C) 86
The following table provides list of Monitor IDs and Device Instances for each of the Monitors
being monitored on PrAMC-7311.
5.5.2 Monitoring Device Critical Errors
Under Linux OS, the Device Drivers LOG abnormal behavior and potential errors occurring in
the Hardware device with KERN_ERR or KERN_CRIT category. These notifications are
considered as potential errors as they could manifest into latent faults in the live system.
As part of monitoring the Device Critical errors, all such Kernel CRITICAL and Kernel ERROR
notifications have been extracted from the PNE Kernel (3.0) driver sources and represented in
the form of a database.
The In Service Monitoring Module of ViewCheck would watch out for the occurrence of these
notifications and on detection would send a notification to XML.
The Device Errors are captured and are identified uniquely by ERROR ID. For definition of
ERROR ID, refer
Error ID on page 19 .
Table 5-28 Monitors
Monitor Description
Monitor
ID
Valid Device Instances Remarks
CPU Core
Temperatures 1000 core 0 and core 1 Temperature of the 2 cores
available on PrAMC-7311 CPU
are monitored individually and
reported if crosses a Set
Threshold.
HDD Health Status 1010 sda1 to sda10 Monitors the Health Status of the
sda1 to sda
10 partitions on the
HDD and reports.
Network Errors 1020 eth0-4 Monitors the various Error
counters for each of the Network
Device Instances and provides an
error counter exceeds the rate of
change.
Network Counters 1021 eth0-4 Monitors the various counters for
each of the Network Device
Instances