Connecting an a/v receiver — audio, Connecting an a/v receiver, Audio – ARRIS DCX3510M User Guide User Manual
Page 23: Connecting to an a/v, Receiver — audio
Connecting Your DCX Set-top
B
DCX with OCAP Software DCX3510-M • User Guide
14
365-095-17068-x.1
Connecting an A/V Receiver — Audio
There are several options available for audio connections to your A/V receiver:
•
Digital audio (OPTICAL S/PDIF)
•
Stereo audio (AUDIO L/R)
If your A/V receiver supports it,, the optical (S/PDIF) digital audio outputs may be used in
place of the stereo audio outputs (audio L/R). These outputs offer a higher level of audio
quality, including support for Dolby Digital audio.
•
Digital audio optical (S/PDIF)—Connect the optical cable to the digital audio
OPTICAL connector on the DCX set-top and the optical connector on the A/V
receiver.
•
Stereo audio—Connect the stereo audio cable to the audio L/R connectors on the
DCX set-top and the audio L/R connectors on the A/V receiver.
For information on configuring your DCX set-top settings, see