ARRIS DCX3510M User Guide - Manual (Page 17)

Connecting Your DCX Set-top
B
DCX with OCAP Software DCX3510-M • User Guide 8
365-095-17068-x.1
Connecting Your DCX Set-top
Instructions and diagrams are included for the following connections:
•
High-Definition Television (HDTV)
•
A/V receiver — Audio
•
Standard-Definition TV (SDTV)
•
Standard-Definition TV (SDTV) and VCR/DVD Recorder
•
A/V receiver, Standard-Definition TV (SDTV), and VCR/DVD Recorder
Before you move or change components on your entertainment system, review the
following:
•
For basic cable connections, use 75 ohm coaxial cables equipped with F-type
connectors
•
Disconnect power from your equipment before connecting or changing cable
connections
For information on connecting to an HDTV, see Video Connection Options.
Caution: Do not place anything on top of your DCX set-top, especially other home
entertainment components. Be sure to provide adequate ventilation to prevent
overheating.
Video Connection Options
The DCX set-top offers several different video connection options. Component video,
HDMI, and IEEE-1394 allow you to view both High-Definition and Standard-Definition TV
programming. Composite video connections allow you to view only Standard-Definition
TV programming. HD programming will be down-converted to SD format for SD outputs.
To determine whether your TV features component video, HDMI, IEEE-1394, or
composite video, check the manual supplied with your TV.
Use the guidelines below to determine the best video connection for your home
entertainment system.
Note: Only one video connection to the TV is required. HD video can only be viewed with
HDMI, IEEE-1394, or component video connections.
4