Denon RCD-N7 - Manual (Page 55)

51
Getting Started
Connections
Basic Operations
Advanced Operations
Explanation terms
Information
Specifi
cations
Specifi
cations
Index
ENGLISH
Index
Troubleshooting
n CD player
• Audio performance
S/N ratio (1 kHz) 100 dB
Dynamic range (1 kHz) 100 dB
Total harmonic distortion (1 kHz) 0.01 %
n Audio AMP
Rated output 2-channel driving
65 W + 65 W (4 Ω/ohms, 1 kHz, T.H.D. 0.7 %)
Dynamic power 80 W + 80 W (4 Ω/ohms)
High frequency distortion 0.1 % (Rated output: –3 dB), 4 Ω/ohms, 1 kHz
Input sensitivity/impedance
AUX1, AUX2
200 mV/32 kΩ
Portable in 110 mV/24 kΩ
Frequency response (5 W, 8 Ω)
AUX input
5 Hz to 20 kHz (±3 dB)
Total harmonic distortion (1 kHz, 5 W, 8 Ω)
AUX input
0.05 %
S/N ratio (10 W, 8 Ω, IHF-A)
AUX input
86 dB
n Tuner
• FM tuner
Range of receivable frequencies 87.5 to 107.9 MHz
S/N ratio (mono) 65 dB
Sensitivity (S/N 30 dB) 9 dBμV (IHF)
• AM tuner
Range of receivable frequencies 530 to 1710 kHz
S/N ratio 40 dB
Sensitivity (S/N 20 dB) 55 dBμV/m
n Clock
Clock method Within 1 – 2 minutes per month
Specifi cations
n Wireless LAN
Network type (wireless LAN standards) Conforming to IEEE 802.11b
Conforming to IEEE 802.11g
(Conforming to Wi-Fi®)z
Transfer rate DS-SS: 11 / 5.5 / 2 / 1 Mbps (Automatic switching)
OFDM: 54 / 48 / 36 / 24 / 18 / 12 / 9 / 6 Mbps (Automatic
switching)
Security SSID (Network name)
WEP key (network key) (64/128 bits)
WPA-PSK (TKIP/AES)
WPA2-PSK (TKIP/AES)
Used frequency range 2,412 MHz – 2,462 MHz
No. of channels Conforming to IEEE 802.11b : 11ch (DS-SS) (Of which 1
channel used)
Conforming to IEEE 802.11g : 11ch (OFDM) (Of which 1
channel used)
n Power supply
Power supply voltage/frequency AC 120 V, 60 Hz
Power consumption 65 W
Power consumption in standby mode 0.3 W
n Miscellaneous
External dimensions 280 (W) x 112 (H)x 299 (D) mm
(11-1/32 ” x 4-13/32 ” x 11-49/64 ”)
Weight 4.3 kg (9 lbs 7.7 oz)
z Wi-Fi® conformity indicates tested and proven interoperability by the “Wi-Fi Alliance”, a group
certifying interoperability among wireless LAN devices.
• For purposes of improvement, specifi cations and design are subject to change without notice.