Denon RCD-N7 - Manual (Page 15)

11
Getting Started
Connections Connections
Basic Operations Basic Operations
Advanced Operations
Troubleshooting
Explanation terms
Information
Specifi
cations
Index
ENGLISH
Turning the power off
Press ON/STANDBY .
The power indicator turns off, and so does the power.
NOTE
Be sure to stop playback before turning the power off.
Setting the current time (Auto Adjust)
(12-Hour Display)
• When the unit is connected to the Internet, the current time is set
automatically.
• The default Time Zone setting of this unit is the Eastern Standard
Time zone.
To change the Time Zone and Summer Time, see “Adjusting the
clock automatically [Clock]” (vpage 29).
• When the unit is not connected to the Internet, set the current time
manually. See “Setting the current time (Manual Adjust) (12-Hour
Display)” (vpage 29).
Button located on both the main unit and the remote control
BUTTON
Button only on the main unit Button only on the remote control [BUTTON]Symbols used to indicate buttons in this manualBasic operationsThis section provides information on basic operations such as
settings and playback procedures.
For other operations, see the sections below. n Setting the timer [Timer] (vpage 28) n Setting the others [Other] (vpage 35) Preparations Turning the power onPress ON/STANDBY.• The power turns on. Press again to set the power to standby.
• Power indicatorStandby ...................................Off
Power on .................................Green
When the timer is set .............OrangeNOTE• When you turn on the power of this unit for the fi rst time after purchasing it, the Network First Setup menu starts up.• If you cancelled “Network First Setup” or changed the network environment, perform “Menu” − “Network” − “Network First
Setup”• Power continues to be supplied to some of the circuitry even when the power is in the standby mode. When leaving home for long
periods of time, either press ON/STANDBY to turn off the power, or unplug the power cord from the power outlet.• Be sure to stop playback before turning the power off. n Completely turning off the powerUnplug the power cord from the wall outlet.
• Note that the time setting is cleared when the power cord is unplugged from the outlet.• The settings made for the various functions may be cleared if the power cord is left unplugged from a power outlet for an extended
period of time./&5803,$%3&$&*7&33$%/ON/STANDBYON/STANDBY
Button only on the remote control [BUTTON]
Symbols used to indicate buttons in this manual
Basic operations
This section provides information on basic operations such as
settings and playback procedures.
For other operations, see the sections below.
n Setting the timer [Timer] (vpage 28)
n Setting the others [Other] (vpage 35)
Preparations
Turning the power on
Press ON/STANDBY .
• The power turns on. Press again to set the power to standby.
• Power indicator
Standby ...................................Off
Power on .................................Green
When the timer is set .............Orange
NOTE
• When you turn on the power of this unit for the fi rst time after
purchasing it, the Network First Setup menu starts up.
• If you cancelled “Network First Setup” or changed the network
environment, perform “Menu” − “Network” − “Network First
Setup”
• Power continues to be supplied to some of the circuitry even when
the power is in the standby mode. When leaving home for long
periods of time, either press
ON/STANDBY to turn off the power, or
unplug the power cord from the power outlet.
• Be sure to stop playback before turning the power off.
n Completely turning off the power
Unplug the power cord from the wall outlet.
• Note that the time setting is cleared when the power cord is
unplugged from the outlet.
• The settings made for the various functions may be cleared if the
power cord is left unplugged from a power outlet for an extended
period of time.
/&5803,$%3&$&*7&3 3$%/
ON/STANDBY
ON/STANDBY