Aplex Technology ACS-2702 - Manual (Page 19)

ACS-2702 User Manual 18
Signal Name Pin# Pin# Signal Name
5V 1 2 GND_AUD
LINE-OUT-L 3 4 LINE-OUT-R
FRONT_JD 5 6 LINE1_JD
LINE-IN-L 7 8 LINE-IN-R
MIC-IN-L 9 10 MIC-IN-R
GND_AUD 11 12 MIC1_JD
23. LINE_OUT:
(Diameter 3.5mm Jack), HD Audio port, An onboard Realtek ALC662 codec is used to
provide high quality audio I/O ports. Line Out can be connected to a headphone or
amplifier.
24. USB45:
USB4/USB5：(Double stack USB type A), Rear USB connector, it provides up to 4
USB2.0 ports, High-speed USB 2.0 allows data transfers up to480 Mb/s ,support USB
full-speed and low-speed signaling.
Each USB Type A Receptacle (2 Ports) Current limited value is 1.5A.
If the external USB device current exceeds 1.5A, please separate connectors into
different Receptacle.
25. LAN1/LAN2:
LAN1/LAN2: (RJ45 Connector), Rear LAN port, Two standard 10/100/1000M
RJ-45 Ethernet ports are provided. Used Realtek RTL8111E chipset, LINK LED
(green) and ACTIVE LED (yellow) respectively located at the left-hand and
right-hand side of the Ethernet port indicate the activity and transmission state
of LAN.
26. BUZ1:
Onboard buzzer.