Aplex Technology AHM-6077 - Manual (Page 35)

AHM-6077 User Manual 35
3.11 Miscellaneous Control
CPU Clock Ratio Unclock
This item is used to lock or unlock CPU ratio.
CPU Clock Ratio
The optional settings range from 6X to 12X.
DRAM Clock at Next Boot
This item allows you to set DRAM clock. The optional settings are: By SPD(DDR 533); 400MHz;
533MHz..
3.12 Password Setting
You can set either supervisor or user password, or both of them. The differences are:
Supervisor password: Can enter and change the options of the setup menus.
User password: Can only enter but do not have the right to change the options of the setup menus.
When you select this function, the following message will appear at the center of
the screen to assist you in creating a password.
ENTER PASSWORD:
Type the password, up to eight characters in length, and press . The password typed now will clear
any previously entered password from CMOS memory. You will be asked to confirm the password.
Type the password again and press . You may also press to abort the selection and not
enter a password.
To disable a password, just press when you are prompted to enter the password. A message will
confirm that the password will be disabled. Once the password is disabled, the system will boot and you
can enter Setup freely.
PASSWORD DISABLED.
When a password has been enabled, you will be prompted to enter it every time you try to enter Setup.