Aplex Technology AHM-6077 - Manual (Page 33)

AHM-6077 User Manual 33
the follwoing wake up events: Power on by Ring, Wake-Up by USB KB from S3(S4), and Resume
by Alarm.
Resume by Alarm
When set to Enabled, additional fields become available and you can set the date (day of the month),
hour, minute and second to turn on your system. When set to 0 (zero) for the day of the month, the
alarm will power on your system every day at the specified time .
Date (of month)
You can choose which month the system will boot up. Set to 0, to boot every day.The optional
settings range from 0 to 31
Time (hh:mm:ss)
You can choose what hour, minute and second the system will boot up.
Note: If you have change the setting, you must let the system boot up until it goes to the operating
system, before this function will work.
3.9 PnP/PCI Configuration
PCI/VGA Palette Snoop
This item is designed to overcome problems that can be caused by some non-standard VGA cards.
This board includes a built-in VGA system that does not require palette snooping so you must leave
this item disabled.
IRQ Resources
Names the interrupt request (IRQ) line assigned to the USB on your system. Activity of the selected
IRQ always awakens the system.