Aplex Technology APC-3218 - Manual (Page 99)

APC-3X18 User Manual 99
2. When the mapping screen message appears, click “OK”
3. Touch each screen as it displays “Please touch this monitor. Press ‘S’ to skip”
Following this sequence and touching each screen is called mapping the touch
screens.
4. After the setting procedure is finished, maybe you need to calibrate for each panel
and controller
NOTES:
1. If you used a single VGA output for multiple monitors, please do not use the
Multiple Monitors function. Just follow the regular procedure for calibration on
each of your desktop monitors.
2. The Rotating function is disabled if you use the Multiple Monitors function.