Aplex Technology APC-3793P - Manual (Page 85)

APC-3x93P_R (SBC-7106A) User Manual 85
6. “Touch this screen to start its calibration” appears on one of the screens. Touch the screen.
7.
“Touch the red square” messages appear. Touch the red squares in sequence.
8. Continue calibration for each monitor by clicking Standard Calibration and touching the red
squares.
NOTES: 1. If you use a single VGA output for multiple monitors, please do not use the Multiple
Monitor function. Just follow the regular procedure for calibration on each of your
desktop monitors.
2. The Rotating function is disabled if you use the Multiple Monitor function.
3. If you change the resolution of display or screen address, you have to redo Map Touch
Screens, so the system understands where the displays are.
About
This panel displays information about the PenMount controller and this driver version.
PenMount Monitor Menu Icon
The PenMount monitor icon (PM) appears in the menu bar of Windows 2000/WIN7 system when you
turn on PenMount Monitor in PenMount Utilities.
PenMount Monitor has the following function