Aplex Technology APC-3793P - Manual (Page 78)

APC-3x93P_R (SBC-7106A) User Manual 78
Standard Calibration Click this button and arrows appear pointing to
red squares. Use your finger or stylus to touch
the red squares in sequence. After the fifth red
point calibration is complete. To skip, press
‘ESC’.
Advanced Calibration Advanced Calibration uses 4, 9, 16 or 25 points
to effectively calibrate touch panel linearity of
aged touch screens. Click this button and
touch the red squares in sequence with a
stylus. To skip, press ESC’.
Command Calibration Command call calibration function. Use
command mode call calibration function, this
can uses Standard, 4, 9, 16 or 25 points to
calibrate E.g. Please run ms-dos prompt or
command prompt c:\Program Files\PenMount
Universa Driver\Dmcctrl.exe -calibration 0
( Standard Calibration) Dmcctrl.exe - calibration
($) 0= Standard Calibration 4=Advanced
Calibration 4 9=Advanced Calibration 9
16=Advanced Calibration 16 25=Advanced
Calibration 25
Step 1.
Please select a device then click “Configure”. You can also double click the device too.