Aplex Technology APC-3793P - Manual (Page 23)

APC-3x93P_R (SBC-7106A) User Manual 23
33. USB45:
USB4/USB5：(Double stack USB type A), Rear USB connector, it provides up to 4
USB2.0 ports, High-speed USB 2.0 allows data transfers up to 480 Mb/s ,support USB
full-speed and low-speed signaling.
Each USB Type A Receptacle (2 Ports) Current limited value is 1.5A.
If the external USB device current exceeds 1.5A, please separate connectors into
different Receptacle.
34. LAN1/LAN2:
LAN1/LAN2: (RJ45 Connector), Rear LAN port, Two standard 10/100/1000M RJ-45
Ethernet ports are provided. Used intel 82574L chipset, LINK LED (green) and ACTIVE
LED (yellow) respectively located at the left-hand and right-hand side of the Ethernet
port indicate the activity and transmission state of LAN.
35. BUZ1:
Onboard buzzer.
36. CN2:
( DF13-30P Connector),For expand output connector, It provides eight GPIO,one RS422
or RS485,one USB2.0,one Power on/off, one Reset.
Function Signal Name Pin# Signal Name Function
5V 5V_S5 2 1 5V_S5 5V
SIO_GPIO61 GPIO_IN2 4 3 GPIO_IN1 SIO_GPIO60
SIO_GPIO63 GPIO_IN4 6 5 GPIO_IN3 SIO_GPIO62
SIO_GPIO21 GPIO_OUT2 8 7 GPIO_OUT1 SIO_GPIO20
SIO_GPIO23 GPIO_OUT4 10 9 GPIO_OUT3 SIO_GPIO22
Ground 12 11 Ground