Aplex Technology APC-3793P - Manual (Page 34)

APC-3x93P_R (SBC-7106A) User Manual 34
COM6：
(Type DB9),serial port, standard DB9 serial port is provided to make a direct connection
to serial devices. COM6 port is controlled by pins No.1~6 of JP6,select output Signal RI
or 5V or 12v, For details, please refer to description of JP6.
Pin# Signal Name
1 DCD# (Data Carrier Detect)
2 RXD (Received Data)
3 TXD (Transmit Data)
4 DTR (Data Terminal Ready)
5 Ground
6 DSR (Data Set Ready)
7 RTS (Request To Send)
8 CTS (Clear To Send)
9 NA
S1：
PWR BT: POWER on/off Button, They are used to connect power switch button. The
two pins are disconnected under normal condition. You may short them temporarily to
realize system startup & shutdown or awaken the system from sleep state.
PWR LED: POWER LED status.
S1 Model
Yes TB-528C1U2P1
No TB-528C1U2
41. TB-528CAN2 R0.10 (option):
SBC-7106A Riser Card,TB-528CAN2 CN3 connect to SBC-7106A CN3 pin Header.
It provides two CAN-bus Interface.
TB-528CAN2 Top：