Apantac MT HOOD Series DVI-D Extenders - Manual (Page 9)

Apantac – MT HOOD - DVI-D Extenders USER GUIDE Page 8 of 24
INSTALLATION AND OPERATION
DVI-1-E Extender and DVI-1-LR Receiver Installation
1. Connection: Plug power adapter into the DVI-1-R.
The orange LED above RJ45 should turn ON to indicate
the power on status. The other LED should turn off,
since there is no input of video signal from “SYSTEM
LINK” port.
2. The “STATUS” LED in the front panel will turn ON as
the EQ/FOCUS control switch to the left and the
EQ/FOCUZ will stay on AUTO. This will not function
until the Receiver gets video signal from “SYSTEM
LINK” port.
3. Connect the DVI monitor’s DVI cable to the Receiver.