Apantac MT HOOD Series DVI-D Extenders - Manual (Page 17)

Apantac – MT HOOD - DVI-D Extenders USER GUIDE Page 16 of 24
DVI-1-EM – Extender Installation
1. First Time Setup: Turn off the DVI output device (PC
or DVD Player) and monitors.
2. Device Connection: Connect local DVI monitor (M1)
to the “DVI/MI OUT” of the Extender. Use the DVI-
HDMI cable plug the HDMI end to “INPUT” port of the
Extender and the DVI-D end to PC or DVD Player’s
DVD-D video port.
3. Connect the power adapter to the “5VDC” and plug into
the power outlet
4. System Turn ON: Turn on your DVI output device and
monitor to confirm the functionality of the display. The
“M1 LINK” LED of the Extender should display orange
to confirm the connection of a local DVI monitor.
5. Remote Monitors: Make sure the remote monitor(s)
to be connected to the DVI-1-EM Extender/Receiver
can display the broadcast video resolution.
6. EQ Adjustment: You can adjust the EQ control to
Auto mode by rotating the EQ control Anticlockwise .
The “EQ” and “AUTO” LEDSs will display blue.
7. EDID Simulation: The Extender has built-in EDID
simulator. When local DVI monitor is connected to
Extender, it will automatically record the EDID data
from DVI Monitor. When a local DVI monitor is not
connected the Extender will simulate the EDID data and
activate the DVI signal on the PC or DVD Player.