Apantac MT HOOD Series DVI-D Extenders - Manual (Page 19)

Apantac – MT HOOD - DVI-D Extenders USER GUIDE Page 18 of 24
DVI-1-ERM – Extender / Receiver Installation
1. First Time Connection: Connect DVI Monitor’s DVI
Cable to the receiver and TURN ON the monitor.
2. Device Connection: Plug power adapter to DVI-1-
ERM (Extender/Receiver), the “PWR” LED and “M1
LINK” will turn ON. The other “LINK” LED should turn
off because there is no input of video signal from “LINK
IN” port.
3. EQ Adjustment: You can adjust the EQ control to
Auto Mode by rotating the EQ Anti-clockwise . The “EQ”
and “AUTO” LEDs will turn ON Blue.