Apantac MT HOOD Series DVI-D Extenders - Manual (Page 11)

Apantac – MT HOOD - DVI-D Extenders USER GUIDE Page 10 of 24
4. Connect the Cable: Plug two ends of the cable to
DVI-1-E/LR Extender’s and Receiver’s RJ45 “SYSTEM
LINK” port. The Receiver’s connected monitor should
now display and the green LED above the DVI-1-LR’s
RJ45 port should turn ON to reflect the DVI signal
activation. For DVI-1-LR, you can manually adjust the
EQ/FOCUS to obtain the best DVI display. The display
DVI resolution will also relate to the distance been the
extension. It is better to test prior to actual installation
and should not exceed the suggested frequency and
corresponding distance.