Dynalink RTA210 - Manual (Page 2)

Important
This Guide is intended to get you started quickly.
We have pre-configured the router for the New Zealand
ADSL network. All you need to do is to follow through the
steps we describe here.
This Guide should be read in conjunction with the ADSL
Router User Manual. This is provided as a PDF file on the
Utility CDROM.
Note: the ADSL Router User Manual was written for
international users. New Zealand users should ignore
relevant material on page 9 and all sections of Chapter 3,
except Section 3.3 PPPoA+NAT mode. PPPoA+NAT is the
only mode of operation currently supported in New
Zealand.
Advanced users who have other setup preferences should
refer to the ADSL Router User Manual. There is a table in
Section 3 of this Guide is to assist you in locating the
relevant material.
Contents inside this box:
RTA210 router
Power adapter 12VDC 1A
ADSL line cord for New Zealand
RJ-45 Ethernet cable
Utility CDROM (User Manual included)