Dynalink RTA210 User Manual
Page 10
Indicator lights
There are four green indicats on the front panel of the router. All lights will come
on indicating self-test in progress every time the router is switched on.
Indicator
Function
Description
PWR
Power
Off - No power.
On - Power is on.
DIAG
Diagnosis
Off - Self-test OK.
Blinking – Upgrade in progress.
On - Self-test or upgrade failed.
LAN
Network Link
Off - Ethernet not present.
Blinking – Data going through Ethernet port.
On - Ethernet is present.
DSL
Link Status
Off - Handshaking/training in progress.
Blinking - Data going through ADSL port.
On - ADSL link is up.
4
Reconfigure router after reset to factory default
If it happens that the router has been reset to factory default, you must restore
the New Zealand configuration to connect. Go to Configuration > WAN > ATM
PVC > Setup ATM PVC:
5