Aesthetix Pandora - Manual (Page 4)

4
IMPORTANT
Save all packaging in a dry place away from fire hazards. Your Pandora is a precision
electronic instrument and should be properly packaged any time shipment is made. In the
unlikely event that you have to return your Pandora to the factory for service, or if you send it
to us for updating, the original packaging will best protect the unit from shipping damage.
In order to achieve the fullest flexibility and enjoyment from your Pandora, we highly
recommend that you read this manual in full before connecting the unit to your audio system.
Note: It is imperative that the Pandora be operated in a well ventilated environment and the
immediate external temperature be maintained as specified. External cooling fans may
be required in some cases. Do not stack any equipment directly above or below the
Pandora to protect it from overheating, as well as the continued functionality of any
equipment near and around it.
WARNING
United States law prohibits disposition of these commodities to Libya, Laos, North Korea,
Cambodia or Cuba unless otherwise authorized by the United States.
AFTER MARKET and THIRD PARTY MODIFICATIONS
Please note that any after market and/or third party modifications will void the warranty. In
the case of changing the feet on a unit, in order to prevent any damage (which will also not
be covered under warranty), please verify that the screws being used to secure non-Aesthetix
feet do not screw any deeper into the chassis than the original ones. The original screw is
10-32 by 3/8” and extends into the chassis 1/8 inch.
Acknowledgements
© 2011-14 Aesthetix Audio Corporation. All rights reserved. Mostly written and Illustrated by
Glenn Buckley
No part of this publication may be reproduced or transmitted in any form or by any means,
electronic or mechanical, for any purpose, without the express written permission of Aesthetix
Audio Corporation.