Aervoe 1500-Watt Energy Center - Manual (Page 6)

6
1. Remove the Energy Center from its packaging and place on a level surface. Make sure caster
wheels are moving freely and all packaging has been removed, especially around the COOLING
FAN and vents.
2. Insert the telescoping handles into the mounted tubes on the back of the unit and clamp them
securely at the desired height.
• MAIN POWER SWITCH & KEY: the main power switch has two functions.
1.
Activates the AC charger, battery, power inputs, and power outputs. Place in the ON
position during charging or when using power.
2. Security key. When in the OFF position, turn 45º to the left and remove the key. This will
make the Energy Center inoperable to anyone without the key. Should be removed when
stored for long periods.
• AC SWITCH: controls the ON/OFF operation of the inverter and 120V AC outputs
• DC SWITCH: controls the ON/OFF operation of the 12V DC and 5V USB power outputs
Fig. 1
ON OFF ON OFF
AC SWITCH DC SWITCH
MAIN POWER
SWITCH & KEY
Enter Esc
（-） （+）
WIND & SOLAR HYBRID
CONTROLLER
SET-UP
POwER CONTROl SwITChES
wIND & SOlAR ChARGE CONTROllER