beautypg.com

Aervoe Power Pod User Manual

Max burton, Power pod #6986

background image

Max Burton

®

Power Pod #6986

IMPORTANT SAFEGUARDS

Read all instructions before operating

Do not place in or around any source of heat or flame to prevent the

rechargeable lithium-ion battery from exploding

Do not operate if there is any damage to the unit or charging adapter

Do not use an extension cord. Plug adapter directly into an electrical outlet

To keep the battery in the best operating condition, do not store for more than 3

months without charging or operating

To avoid electrical shock, do not immerse cord or unit in water or other liquids

Unit may be operated in wet environments but do not leave it out in severe

weather

Administer close supervision when using this spotlight around children

PARTS IDENTIFICATION

CHARGING THE POWER POD

The Power Pod is a power supply for the #6985 3-Watt Spotlight and may be used

as a portable power supply for devices using a USB charging adapter. For optimal

performance, fully charge prior to first use. Additional Power Pods can be purchased

separately and kept charged for uninterrupted power to the spotlight or other

accessory device.

Plug the 120V AC/DC wall adapter into the DC

1.

InPUT on the Pod and the other

end into an electrical wall outlet. If you have a compatible 12V DC vehicle

adapter it may be connected in the same way.

To charge using a solar collector, connect the 12V DC vehicle adapter to the DC

2.

InPUT on the Pod. Connect the female 12V adapter that is included with any

Aervoe Solar Collector to it and follow the charging instructions included with

your solar collector.

A red charging indicator light on the Pod will illuminate to indicate it is charging

3.

and remain on during charging.

A green charging indicator light will illuminate when the battery is fully charged.

4.

nOTE: The Power Pod may be left connected to the chargers to ensure the unit is

fully charged and ready for use. Always fully charge before storing for over 3 months.

Test every 30 days to ensure proper operation.

USB POWER OUTPUT

The 5V~500 mAh USB port on the Power Pod may be used to charge electronic

devices such as LED work/reading lights, cell phones, cameras, MP3 players, GPS,

etc. with the stored power in the Pod. Plug in your device’s USB charging adapter

into the USB OUT PORT in the Pod to charge (provides up to 1000-1400 mAh on a

full charge at 5V~500 mAh output).

ATTACHING TO THE #6985 3-WATT SPOTLIGHT

Attach the Power Pod to the Spotlight by turning it in a clockwise direction ¼ turn. Be

careful not to damage the electrical connection terminals inside of the Power Pod.

Follow the instructions provided with the Spotlight.

LED Bulb

Handle

Handle Adjustment

Button

Power Button

Power Pod

Attached

Power Pod

LED Indicator

Light

USB Out

DC IN

DC Charging

Plug

Battery

Compartment

Electronic

Device

USB 5V

DC Out

Device’s USB

Adapter Cord