Adtec digital AVS2 - Manual (Page 5)

NOTE: If J8 and J9 are both IN, both interrupts'
? and 1 will go active.
SPECIFICATIONS:
Video Inputs: BNC connectors
Audio Inputs: RCA connectors
Video Bandwidth: 10 MHz minimum
Power/Data Loop: DB9 Female connector
Audio Bandwidth: 10 MHz minimum
Crosstalk: -65 dB minimum
Power/Data: DB9 Female connector
Dimensions: 5.5" x 3" x 1.7"
Table1.1
DB9 Control In/OUT Function Notes
1 D0 Data Bit 0
2 D1 Data Bit 1
3 D2 Data Bit 2
4 D3 Data Bit 3
5 Override Manual override from Lite-Ning or Active with J5 ON
6 Interrupt 1 Interrupt 1 for Active or Lite-Ning INT2 use
7 +5 VDC +5 Volts DC
8 Ground Ground
9 Interrupt 0 Interrupt for Lite-Ning INT1 use
AVS2 ACCESSORIES:
WT-1: Wall Transformer, 5 VDC REG, 300 MA, Powers up to three units
M009KIT: Rack Mount kit, 1 rack space, holds up to three units
DTMF: DTMF tone decoder for use with automatic video or manual DTMF switching
Operator: Telephone interface for performing manual switching.
All features and specifications subject to change without notice.