Pairing/assigning test ports – Xtramus NuApps-QoS-RM V1.1 User Manual

Page 34

Website: www.Xtramus.com

XTRAMUS TECHNOLOGIES

4.9.1. Pairing/Assigning Test Ports

Before making any test configurations on the Test Configuration screen, you have to make the proper
port pairing/assigning first. NuApps-QoS-RM has 2 different test modes available: One-One and Many-
Many.

To access these 2 test modes, please click the scroll-down menu located on the upper-right part of
NuApps-QoS-RM’s window as shown in the figure down below.

Also, set the direction of source port to destination port by clicking the scroll-down menu located
down part of the scroll where you chose the One-One and Many-Many mode.

If you want to reset all settings you’ve done for NuApps-QoS-RM’s test mode back to the default value,
please press the Reset button located next to the scroll-down menu.

Please see the sections down below for more information regarding to pair/assign ports in different test
modes.