Xtramus NuApps-G8261-RM V1.0 - Manual (Page 48)

Load Pair Port Transmitting Setting
Stabilization (sec)
The Load Pair Ports will hold and wait for the set amount of time (in seconds)
after Test Pair Ports starting transmitting test packets.
Network Traffic Model
Model 1
Setting the Network Traffic Model to Model 1 will set packets transmitted from
Load Pair Ports as follows:
y 80% of the packets will be 60 byte packets.
y 5% of the packets will be 572 byte packets.
y 15% of the packets will be 1514 byte packets.
Model 2
Setting the Network Traffic Model to Model 1 will set packets transmitted from
Load Pair Ports as follows:
y 30% of the packets will be 60 byte packets.
y 10% of the packets will be 572 byte packets.
y 60% of the packets will be 1514 byte packets.
Buttons
Rest Parameters for
All Test Cases
Click this button to reset all settings made for all Test Cases to default.
Select Click this button to include this Test Case for DUT test.
48
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®