Xtramus NuApps-G8261-RM V1.0 - Manual (Page 21)

21
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®
File
Load
Configuration
File
If you have a previously saved
configuration file stored in your PC, you
can load it and apply all the setting
you’ve made by choosing “Open an
Existing Configuration” from the
Select Config pop-up window.
Configuration files are saved in the
format of “＊.ini”, and are named with
the date/time when the files are
created.
Please note that the module card
information contained in the
configuration file you’ve loaded from
your PC MUST match to your
NuStreams Chassis’ current status.
Exit
A prompt pop-up window will ask if you
are sure to exit NuApps-G8261-RM.
Click YES to exit NuApps-G8261-RM,
or click NO to cancel.
4.1.2. View
View
Module Info.
You can view all information regarding to the module cards you’ve installed on your
NuStreams-2000i/600i by View function on the Menu Bar.
Please note that if your module cards’ firmware/FPGA version do not match
NuApps-G8261-RM’s requirements, a “
” icon will be displayed in that slot.
¾ Refresh: Refresh the module information displayed here.
¾ Close: Close Module Information window.