Vectronics AT-100 - Manual (Page 2)

A T-100 Active Antenna
FRONT PANEL CONTROLS
Owner's Manual
1. GAIN CONTROL: Adjust the gain of the AT-100 from -10 dB
to +10 dB.
2. BYPASS SWITCH: Connects the Input SO-239 directly to the
Output SO-239.
3. PEAK - TUNE CONTROL: Optimizes Peak Tuning for each of the 5
bands.
4. BAND SWITCH: Power rotary switch that selects the 5 bands
from 300 KHz to 30 MHz.
5. POWER LED Illuminates when power is on.
REAR PANEL CONNECTIONS
2
VECTRONICS(R)
STARKVILLE, MS USA
6. POWER: 3.5mm barrel connector for power to AT-100 9-12
VDC with center positive. Inserting the plug into
the rear jack automatically disconnects the internal
battery.
Vectronics offers an optional 12 VDC
adapter (AC-12).