TVLogic TDM-243W - Manual (Page 25)

Multiformat 3D Monitor 25
[7] WAVEFORM
5. Menu Operations
PAGE II >> PAGE I
RANGE EROR
Y MAX
Y MIN
C MAX
C MIN
Y PICTURE BLINK
C PICTURE BLINK
OFF
MAX
MIN
MAX
MIN
OFF
OFF
TDM-243W
• RANGE ERROR
- Used to display the values of Y MAX, Y MIN,
C MAX, C MIN, Y PICTURE BLINK and C
PICTURE BLINK on the screen.
- Selected values in Y MAX, Y MIN, C MAX, C
MIN are indicated in WAVEFORM/VECTOR or
Y/Cb/Cr.
- If Y PICTURE BLINK or C PICTURE BLINK is
enabled, the section of image that exceeds
the selected values of Y MAX, Y MIN, C MAX
and C MIN blinks.
• Y MAX
- This item sets the maximum luminance level.
- Available values are between 0 ~ 127.
- Exceeded selection displays on the top
portion of the waveform or display.
• Y MIN
- This item sets the minimum luminance level.
- Available values are between 0 ~ 127.
- Exceeded selection displays on the top
portion of the waveform or display.
• C MAX
- This item sets the maximum chroma level..
- Available values are between 0 ~ 127.
- Exceeded selection displays on the top
portion of the waveform or display.
• C MIN
- This item sets the minimum chroma level.
- Available values are between 0 ~ 127.
- Exceeded selection displays on the top
portion of the waveform or display.
• Y PICTURE BLINK
- This item sets selections of image that
exceeds Y MAX and Y MIN to blink.
• C PICTURE BLINK
- This item sets selections of image that
exceeds C MAX and C MIN to blink.