TVLogic TDM-243W - Manual (Page 13)

Multiformat 3D Monitor 13
5. Menu Operations
• BRIGHT
- This item controls the degree of brightness
between MIN (-100) and MAX (100).
• CONTRAST
- This item controls the contrast ratio between
MIN (-100) and MAX (100).
• CHROMA
- This item controls saturation between MIN
(-50) and MAX (50).
• PHASE
- This function is not supported.
• APERTURE
- This item controls the aperture between
MIN(0) and MAX(25).
• NTSC SETUP
- This function is not supported.
• VGA H POSITION
- This function is not supported.
• VGA V POSITION
- This function is not supported.
• FOCUS ASSIST LEVEL
- This feature controls focus assist level.
- Available values are between 0 ~ 100. Larger
value means greater detail detection.
- Focus assist color is presented when the
difference between the border selections
exceeds the selected value.
- This feature is only available when FOCUS
ASSIST mode is selected. FOCUS ASSIST mode
can be selected by pressing [BLUE ONLY/
MONO] button.
• FOCUS ASSIST COLOR
- Initialize the displayed color when the value
of FOCUS ASSIST is exceeded.
- Available values are red, green, blue and user.
• RED
- Controls Red value when “FOCUS ASSIST
COLOR” is set to “USER”.
* Available value is between 0~ 255.
• GREEN
- Controls Green value when “FOCUS ASSIST
COLOR” is set to “USER”.
* Available value is between 0~ 255.
• BLUE
- Controls Blue value when “FOCUS ASSIST
COLOR” is set to “USER”.
* Available value is between 0~ 255.
• BACK LIGHT
- Controls the backlight level of the LCD panel.
- The values are between 0 ~ 100. Higher value
means brighter screen.
• NOISE REDUCTION
- Configure 3D-Noise Reduction filter.
- The values are between 0 ~ 10.
- Turn off 3D-Noise Reduction Filter, when the
value is “0
[1] Picture
PAGE I >> PAGE II
BRIGHT
CONTRAST
CHROMA
PHASE
APERTURE
NTSC SETUP
VGA H POSITION
VGA V POSITION
PAGE II >> PAGE I
FOCUS ASSIST LEVEL
FOCUS ASSIST COLOR
RED
GREEN
BLUE
BACK LIGHT
NOISE REDUCTION
0
0
0
0
0
7.5IRE
MIN
MIN
MIN
RED
50
50
50
MIN
MIN
TDM-243W TDM-243W