TVLogic TDM-243W - Manual (Page 16)

16 Multiformat 3D Monitor
• HD DISPLAY MODE
- This item controls the display ratio in HD mode.
- Available values are 16:9, 1.85:1 and 2.35:1.
• TIME CODE ENABLE
- This item controls the time code.
- Available modes are OFF, VITC and LTC.
• ORBITER CIRCUIT
- Feature prevents image sticking effect on LCD
Panels when signal input is used. The user
may decide number of pixels to move.
- The number of pixels should be within range
between MIN(0) and MAX(100). Moving speed
is 10 minutes per one pixel line.
• CLOSED CAPTION
- This item selects Closed Caption.
- Available modes are OFF, 708, 608(LINE21)
and 608(ANC).
* 608 : CEA-608-B, 708 : CEA-708-C standard
display only.
• 608 CHANNEL SELECT
- Selects Closed Caption 608 channel.
- CC 1 ~ CC 4 supported.
• 708 SERVICE SELECT
- Selects Closed Caption 708 service.
- SERVICE 1 ~ SERVICE 6 supported.
• 3D INPUT FORMAT
- This item sets 3D Input format.
- Available modes are SINGLE STREAM, DUAL
STREAM and 3G-B.
* DUAL STREAM : Displays 3D feed with SDI or
HDMI 2 inputs(Right/Left).
* SINGLE STREAM :Displays 3D feed with SDI or
HDMI 1 input(Right/Left).
* 3G-B : Displays 3D feed with SDI 1 input
(Right/Left)
• S. STREAM CH.
- This item used to select input channel applied
in SINGLE STREAM.
- Available modes are (SDI/HDMI) LEFT, (SDI
/HDMI) RIGHT.
• S. STREAM FORMAT
- This item used to set 3D format in SINGLE
STREAM.
- Available modes are SIDE-BY-SIDE, LINE BY
LINE, SEQUENTIAL.
* SIDE-BY-SIDE : Displays 3D feed with SIDE BY
SIDE 3D format.
*LINE-BY-LINE : Displays 3D feed with LINE BY
LINE 3D format.
*SEQUENTIAL : Displays 3D feed with FIELD
SEQUENTIAL or FRAME SEQUENTIAL 3D format.
• LEFT CH. MIRROR
- This item reverses image of left input(SDI-L or
HDMI-L) left and right in 3D mode.
• RIGHT CH. MIRROR
- This item reverses image of right input(SDI-R
or HDMI-R) left and right in 3D mode.
• 3D L/R SWAP
- This item sets priority of the first video frame
for the left/right input in 3D mode.
- This item sets the priority of left/right input
for the left screen in PBP mode.
• SWAP INTERVAL(Sec.)
- This item sets the swap interval time for 2D
SWAP mode.
- Available value: 1~5 Seconds.
• PAYLOAD ID
- This item displays input signal’s ID when the
3D input format is DUAL STREAM.
PAGE I >> PAGE II
HD DIPLAY MODE
TIME CODE ENABLE
ORBITER CIRCUIT
CLOSED CAPTION
608 CHANNEL SELECT
708 SERVICE SELECT
PAGE II >> PAGE III
3D INPUT FORMAT
S.STREAM CH.
S.STREAM FORMAT
LEFT CH. MIRROR
RIGHT CH. MIRROR
3D L/R SWAP
SWAP INTERNAL(SEC.)
PAYLOAD ID IN-L: -
16:9
VITC
OFF
OFF
CC 1
SERVICE 1
DUAL SREAM
(SDI/HDMI) LEFT
LINE BY LINE
DISABLE
DISABLE
ON
2
IN-R: -
TDM-243W TDM-243W TDM-243W TDM-243W
5. Menu Operations
[4] DISPLAY & 3D