TVLogic SWM-170A - Manual (Page 13)

24 Multi Format LCD Monitor Multi Format LCD Monitor 25
●
DHCP
- Used to control DHCP function.
●
IP ADDRESS
- Used to set the IP address connected to a
Monitor.
●
SUBNET MASK
- Used to set the SUBNET MASK connected to
a Monitor.
●
GATEWAY
- Used to set the GATEWAY connected to a
Monitor.
●
PORT NO
- Used to set the port number. Default port
number is 10262.
●
NETWORK SETTING APPLY
- When the value of IP address, Subnet mask,
Gateway or Port no. is changed, set the
Network settings apply as [on] to apply the
setting normally.
●
UMD CHARACTER
- Customizes the characters for Under Monitor
Display.
- Alphabets, numbers and special symbols are
available.
- Maximum of 8 characters can be used.
●
UMD CHARACTER COLOR
- Used to set the color of UMD character.
- Available colors are WHITE, RED, GREEN,
BLUE, YELLOW, CYAN and MAGENTA.
●
UMD BG. TRANS
- Used to set the transparency of the UMD
background.
- Available values are SCALE DOWN, OPAQUE,
50%, 90% and 100%.
SWM-170A SWM-170A SDI A SDI A
[5] GPI
5. Menu Operations
PAGE IV >> PAGE I
UMD CHARACTER
UMD CHARACTER COLOR
UMD BG. TRANS
PAGE III >> PAGE IV
DHCP
IP ADDRESS
SUBNET MASK
GATEWAY
PORT NO
NETWORK SETTING APPLY
CHANNEL1
GREEN
50%
OFF
192.168.123. 0
255.255.128. 0
0. 0. 0. 0
10262
OFF
1080/60i 1080/60i
Bit 1
(Tally2)
Bit 1
(Tally1)
Operation
0 0
CHANNEL1
0 3
CHANNEL1
2 2
CHANNEL1
3 1
CHANNEL1
0 1
CHANNEL1
[5] GPI
5. Menu Operations
●
TSL V5.0 D-UMD TALLY TPYE – USER COLOR
- Color selections between TALLY1 ~ TALLY2.
- UMD DISPLAY should be set in D-UMD(D-8C).
- D-UMD TALLY TYPE should be set in the USER COLOR.
- The following appearance of UMD DISPLAY is set as D-UMD(D-8C), D-UMD TALLY TYPE
and TALLY COLOR.