Dell 1100 - Manual (Page 33)

Printing 25
Printing
Basic Printing
1 Load paper. See page 19.
2 With your document open, click File Print. Make sure that your printer is selected.
3 To change the printer settings, click Properties, Preferences, Options, or Setup, depending on
the program or operating system.
The printer properties window displays.
4 From the five tabs on the top of the printer properties window, confirm the selections.
5 Click OK until the Print window appears.
6 Click OK or Print, depending on the program or operating system, to start printing.
NOTE: Press on the operator panel to cancel a print job. In Manual Feed mode, you can’t cancel a
print job by pressing .
Accessing Printer Properties
Change printer settings in the printer properties tabs. The printer properties window differs,
depending on your operating system.
1 With your document open, click File Print.
The Print window appears.
2 In the Print window, click Properties, Preferences, Options, or Setup, depending on your
program or operating system.
3 For details about the printer properties tabs, please refer to the HTML User’s Guide .
Setting High Altitude Correction
If your printer is going to be used at an altitude above 2,500 m (8,200 ft), you can optimize the
print quality for those circumstances using the High Altitude Correction option.
1 Click the Windows Start menu.
2 Click Settings and then Printer, or Printers and Faxes.
3 Select the Dell Laser Printer 1100 icon.
4 Right-click on the printer icon and select Properties.
5 Click the Printer tab and select the High Altitude Correction checkbox.
→
→
1100-OM_EN.book Page 25 Friday, May 20, 2005 3:14 PM