Thor HD Video Encoder & DVB-S2 Modulator - Manual (Page 15)

THOR H-1SDI-DVB-S2
~ 12 ~
RF out level: The RF attenuation range is from -16db-0, maximum output
level ≥ -8dbm with 0.1db step. After entering this setting submenu, user can
shift UP/DOWN/LEFT/RIGHT key to set the output level and press ENTER to
confirm.
RF out: The RF out-mode can be selected under this menu: The modes
contain: single tone, modulation, test lation, and off lation.
Spec Invert: Switch to the Spec Invert mode between Normal and Invert
under this menu.
3.2.4 BISS Modulate
User can press “Enter” key to enter into below menu of t BISS Modulate.
BISS Mode Set: Choose between Mode 1 and Mode E. Detailed operation will
RF frequency
2000.000 MHz
RF Out Level
-00.0db
RF Out
Single tone
Spec Invert
Normal Invert
4.1 BISS Mode Set
4.2 Program Select
4.3 SW Data
4.4 Select ID
4.5 ESW Data
4.6 Input Data